Bisley OP15C One-Piece Angled Dovetail Mount 25mm

Thoughtful delivery service

Easy 30 day returns

Certified Reviews

Description

Bisley OP15C One-Piece Angled Dovetail Mount 25mmThe Bisley OP15C is a one piece scope mount with an angled, inclined base, machined with 0. 75mm of vertical taper built into the body. That taper angles the scope forward, compensating for barrel droop or bringing elevation adjustment back within range on rifles where the scope's own adjustment isn't enough to reach zero. It is a medium height mount sized for 25mm (1 inch) scope tubes, and clamps to a dovetail rail for a solid, single piece fit

and a funnel is supplied so topping it up is mess-free

These are Leupold's Standard (STD) scope rings in a 1-inch diameter and Super High height

With permanent* ZECK-Protec

Teflon Shield+ treatment on the outer surface provides water and dirt repellency

Built around a double-cup design

Applied to a clean

The AP20 is designed around a modular weight system

The Nosler Ballistic Tip Hunting bullet in 6mm (0

Take therefore the habit of wiping off the knife and use oil on the blade after use

stand up to handling and pin neatly to a backing board or frame

25-06's generous case capacity push muzzle velocity to around 3

400 inch hole spacing